sundstrand

Vickers Vane Motor MHT 380/440/500

When you put the cartridge insert vanes into the rotor slots at the least diameter of the cam ring. You will need to rotate the cartridge a full turn before you put it together, this make the springs and guides all line up. Also, put together both of the rings and spacers with the case […]

Vickers Vane Motor MHT 380/440/500 Read More »

Eaton Series 33-64 Valve Block & Rotating Group Parts

If we can help with ordering your parts or even repair your unit, give us a call at 662-871-8403 or 800-361-0068 [email protected]

Eaton Series 33-64 Valve Block & Rotating Group Parts Read More »

Sundstrand Series 25 Variable Displacement Motor

If we can assist you with repairing your unit, call us at 662-871-8403 or 800-361-0068 [email protected]

Sundstrand Series 25 Variable Displacement Motor Read More »

Vickers PFB5/6 Piston Pump

Fixed and Variable DisplacementPFB 5, PFB 10, PFB 20PVB 5/6, PVB 10/15, PVB 20/29, PVB 45 and PVB 90 to SAEPVB 5/6, PVB 10/15, PVB 20/29 to DIN/ISO 3019 If you need more info on this type of pump, call us at 662-871-8403 or 800-361-0068 [email protected]

Vickers PFB5/6 Piston Pump Read More »

Parker /Denison Series T6DCC & T6DCCM Hydraulic Pump

If you need assistance with this unit for repairs or parts, contact us at 662-871-8403 or 800-361-0068 [email protected]

Parker /Denison Series T6DCC & T6DCCM Hydraulic Pump Read More »

Eaton Neutral Lockout

Mating connector and terminal part numbers Connector #1201 5792 Terminals #1208 9040 Cable Seal #1201 5323 When you are putting the servo control valve together some hydraulic fluid can come out, when trying to take out the neutral lockout switch and adapter assy. Make sure you cut off the hydraulic reservoir to the pump and

Eaton Neutral Lockout Read More »

Denison Goldcup Hydraulic Pump 6C, 7A, & 8A – Gerotor and Barrel Hold-down

When putting this together have the unit’s shaft in a level position and the valve block mounting is facing up. Turn the shaft til the keyway in the auxiliary shaft til you get to 12:00 position. This shows being assembled for a RH rotation. Put in the dowel pin in the hole in the port

Denison Goldcup Hydraulic Pump 6C, 7A, & 8A – Gerotor and Barrel Hold-down Read More »

Sundstrand Sauer Danfoss Series 10/38 – Change Valve Block

You can take off the valve manifold assy and reinstated as a whole unit. The instructions show you how to take it apart. Take off the hex cap screws and raise up the manifold off the motor end cap. There are two ports that are closed off with orings and two joining ports that have

Sundstrand Sauer Danfoss Series 10/38 – Change Valve Block Read More »

How a Reservoir Works and Types

Tupelo Hydraulics would like to talk about Reservoirs and the different types and its importance: Industrial reservoirs come in a variety of styles among which are the L shaped,overhead and the conventional reservoir. Besides acting as a fluid container, a reservoir serves also to cool the fluid, to allow contamination to settle out and to

How a Reservoir Works and Types Read More »