Pressure on the bowls don’t need to go over 150 psi and temps don’t need to go over 120 degrees. If it is a metal bowl max is 250 psi and 200 degrees on the temp. They suggest you use bowl guards if it is a polycarbonate one (bottom right diagram). If you need more […]
The regulators are made to work with low volume air flow or that is not going anywhere. You can choose from two mounting styles. If you use a panel mounting it has barbed fittings that have connection the size of 1/16″- 1/8″ ID tubing and a panel nut. You also can choose sub base mounting,
If you have need of these filters or regulators, call us at 662-871-8403 [email protected]
Air Line Filters, Regulators and Lubricators Part l Read More »
There are several types of these amplifiers to choose from. The pressure parameters are 100 PSI to 500 PSi. To prevent your unit from runaways, most let the inlet air to stabilize at the outlet before you let unit to cycle. If you need more info on this unit, call us at 662-871-8403 or 800-361-0068
If you need more information on solenoid valves and manifolds, Call us at 662-871-8403 [email protected]
If you need help in figuring out what best suits your machines needs, give us a call at 662-871-8403 [email protected]
Look on the model code for control data information each model. C and CM Pressure Compensators This means it will intuitively change how the pump will handle pressure at a predetermined time and amount of pressure at the time it is needed. The amount of pressure can go up or down (60 – 90 psi)
Vickers PVB/PVB5/PVB10/PVB6/PVB15/PVB29 Control Data Read More »
If we can assist you with answering questions or repairing your unit, call us at 800-361-0068 [email protected]
Sundstrand Series 15 Pumps/Motors – Troubleshooting Read More »
Variable Displacement With Auxiliary Package Gauge Pressure Ranges 6000 PSI – A & B port 200 PSI – case port 500 PSI – replenishment port 1000 PSI – servo port Putting in the system pressure gauge, make sure the modulating pin is in the port. Don’t put the gauge in the servo filter line when
Denison Hydraulics Goldcup Series 7A Axial Piston Pump Read More »
Set up pressure control Dr Set up flow control valve like DRS If you want a reliable drive torque with different operating pressure, swivel the angle and it goes with the output flow of teh axial pump it is different in a way that the flow of fluid and pressure can be the same. Your