They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to indicator variance. […]
If you have a question or if you need your unit repaired, call us at 800-361-0068 [email protected]
Flood all parts with system fluid at assembly to offer initial greasing. Put “O” rings into inlet body and vanes into rotor with radius edge of both vanes outward. Place rotor and vanes on inlet body.Mount ring over rotor and vanes with arrow or ring pointing in direction of rotary motion. Then add the two
In the diagram below you will see how the fluid flow is done in the pump cartridge. The rotor is determined by the ring that is beside the driveshaft, that is latched onto a power origin. When the rotor turns, the centrifugal force on the vanes makes it to where it goes behind the elliptical
Vickers Vane Pump V100, V200, V300, V400, V500 & V2P Series Read More »