Ordering a gauge – put G Ordering an automatic drain impluse – D and F for float Ordering one with an adustment knob – K Ordering one with bracket mount regulator – B Just make sure you put these letters in your ordering of different options you want. If you happen to use a poly […]
Integral Regulator Filters Read More »
If you need more info on these filters, regulators and lubricators, call us at 662-871-8403 [email protected]
Filters and Lubricators – Duo Combo Read More »
Pressure on the bowls don’t need to go over 150 psi and temps don’t need to go over 120 degrees. If it is a metal bowl max is 250 psi and 200 degrees on the temp. They suggest you use bowl guards if it is a polycarbonate one (bottom right diagram). If you need more
Filter Regulator Lubricator – Trio Combo Read More »
The regulators are made to work with low volume air flow or that is not going anywhere. You can choose from two mounting styles. If you use a panel mounting it has barbed fittings that have connection the size of 1/16″- 1/8″ ID tubing and a panel nut. You also can choose sub base mounting,
Sub Small Scale Regulators Read More »
A. Impulse Drains This type of drain does not have levers, pilot device or levers. Has one part that moves. Has an actuator that doesn’t let it gunk up or let debris in that will not let it drain properly. B. When air goes thru the filer (A), (B) has the same amount of pressure
Automatic Drains – Impulse and Float Read More »