This type of thrust plate is totally interchangeable and be put in new or older machinery. If you do have an older machine, before you put the new parts into, make sure to do an overhaul to take out worn parts and put in new ones. Along with your new plates. They are very easy […]
They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to indicator variance.
A variable displacement pump is a device that converts mechanical energy to hydraulic fluid energy. The displacement, or amount of fluid pumped per revolution of the pump’s input shaft can be varied while the pump is running. Many variable displacement pumps are “reversible”, meaning that they can act as a hydraulic motor and convert fluid
Dynapower 4/6 Cube Gen lV Variable Displacement Pump Part ll Read More »
Call us for any of your Dynapower Cube 9 or Goldcup needs at 662-871-8403 or 800-361-0068 [email protected] [email protected]
The motor needs to be filled up with fluid (fill the case chamber), start on low speed and don’t put a load pressure on it til you bleed it out. If not used in awhile, fluid can leak out thru the case in the lines. Fluid needs to be in the lines to start it
Three Series you can get NW – 2500 PSI 2″ – 4″ bore – medium ST – 3000 PSI 2″ – 6″ bore – standard UT – 3000 PSI 2″ – 12″ bore – heavy The second picture is a R2 it is a medium duty air and hydraulic cylinder that has steel construction. The
Hydraulic Cylinders – Different Makes and Models Read More »