Fraud Blocker

Eaton Hydraulic Series 33-64 Motor

Eaton Series 33 thru 64 – End Cover

Put in two dowel pins and a gasket on the cover. Put some grease on the bearing shims and bearing cup and put in the cover. Next check the output shaft for end play. Put the end cover in, but don’t put in the valve or bearing plates yet. This helps with the spring tension […]

Eaton Series 33 thru 64 – End Cover Read More »

Eaton Hydraulic Series 33-64 Motor Valve Block/Integral Valves

If you motor has a valve block put in orings and backup rings on the valve block. The high pressure ports need an oring and backup ring. Put the oring on first and then the back up ring. You will see a curved side of the ring needs to go toward the oring. Put he

Eaton Hydraulic Series 33-64 Motor Valve Block/Integral Valves Read More »