Sundstrand Series 90/130 Motor Changes
If you need more info on the 90 Series, give us a call at 66-2871-8403 or 800-361-0068 [email protected]
orings
Rexroth Hydraulic Cylinders and Repair Kits
Rexroth Hydraulic Cylinders 1 1/2″ – 14″ Bore and Repair Kits In the diagrams and charts you will find the bore sizes and repair kits for this. On the bore chart if you see a (t) like symbol by it, it means the quantity may be more depending on mounting and bore size. All the
The Design of Cylinders Are Smarter
How Smart Cylinders Are Designed Most of the smart cylinders encompass the sensing units in the body of the cylinder. By doing this it want let the sensor get crushed and it makes the unit look better. The wire leads in the cylinder are coated with a non conducting substance that can hold up to
Advantages of Using Small Cylinders
Small cylinders are reliable, save space and cost very little. Most have a minimum length of 2 3/4″ long. They have some that are double acting cylinders for pressures as high as 5000 PSI. Some have 1/2″ to 3″ bore in any stroke to 72″. It has a standard lip type rod seals that get
What Makes Up A Cylinder
The parts that make up a cylinder are; body, pistons that move and the piston rod that is hooked to the piston. There are also end caps that are connected to the cylinder body barrel by way of threads, keeper rings, tie rods or a weld. A rod gland is a cylinder rod that goes
Vee Packing Seals for Cylinder
Seals need to be made to have options in clearances if your going over or thru threaded surfaces or sharp projections. The clearance level needs to be made for the least amount tolerance in order for it to do it’s job. For every one thousandth of an inch that is added to the clearance that