They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to indicator variance. […]
The support rods are in each of the tandem mounting kits. There are different height differences for each type of job you want it to do, that they leave it up to the customer to bring their own rods and lock nuts. On the chart are support guide diameters and how you should mount it.
Meaning of model code for example HBOL-F2-2/0-lP-6P HBOL = H – high pressure shaft seal used for pressure priming L = L – 5.4 GPM – 3000 PSI Max. M = M – 3.1 GPM – 5000 PSI Max H = H – 1.65 GPM – 10000 PSI Max F2 = seals for Ester Fluid
Here are some charts, diagrams and breakdowns that will help you on this particular pump. This is a variable Volume Vane Pump. Call us at 662-871-8403 or email us at [email protected] for more help on this unit