Eaton IPOR End Cover Archives

Eaton Pump Ball Guide 33-76 Series

cessna, Cylinder Information, dynapower, eaton, hydraulic, motor, neutral lockout switch, packing, packing or seal kit, parker, pump, racine, reservoir, rexroth, seal kit, sundstrand, sundstrand sauer danfoss, swashplate bearing, tie rod end cylinder, torquemotor, vane pump, Vane Pump Information, vee packing / Susan Susan

Thick Plate is 101315 Code 61 SAE split flange, 5000 PSI, drilled and tapped for 3/8-16 UNC 28 thread bolt Code 62 SAE split flange, 6000 PSI, drilled and tapped for 7/16-14 UNC 28 thread bolt If you need more info on this unit, call us at 662-871-8403 [email protected]

Eaton Pump Ball Guide 33-76 Series Read More »

Eaton Series 33 thru 64 – End Cover

Put in two dowel pins and a gasket on the cover. Put some grease on the bearing shims and bearing cup and put in the cover. Next check the output shaft for end play. Put the end cover in, but don’t put in the valve or bearing plates yet. This helps with the spring tension

Eaton Series 33 thru 64 – End Cover Read More »

Eaton IPOR End Cover – Models 3320 – 7620 & 3321 – 6421

cessna, Cylinder Information, eaton, hydraulic, motor, Neque, neutral lockout switch, packing, packing or seal kit, parker, pump, racine, seal kit, sundstrand, sundstrand sauer danfoss, swashplate bearing, tie rod end cylinder, torquemotor, vane pump, Vane Pump Information, vee packing / Susan Susan

The chart at the top left: *SAE Code 61 split flange 3000 PSI – 3/8-16 UNC 2 B thread bolt ** SAE Code 62 split flange 6000 PSI — 7/16 -14 UNC 2B thread bolt Bottom chart *** orifice dia. .028, .036, .044, .052, .057, .065, .073, .094, .102 stake 6 places outer edge for

Eaton IPOR End Cover – Models 3320 – 7620 & 3321 – 6421 Read More »