If you motors have a lip seal you will need to take out the shaft seal you will need to use a par of retaining ring pliers to take out the retaining ring. Then use a punch and hammer to make a hole in the shaft seal. Put in a 3 inch screw that has […]
You need further assistance with type of pump, call us at 662-871-8403 or 800-361-0068 [email protected]
Sundstrand Series 18 – Change Shaft & Trunnion Seals Read More »
If your unit uses a lip seal, the kits has a shaft seal, retaining ring and spacer. You will only need the spacer if you have profound use out in the field. The spacer has the seal in a different place on the shaft sealing region. Before you install this, make sure the shaft sealing