This type of thrust plate is totally interchangeable and be put in new or older machinery. If you do have an older machine, before you put the new parts into, make sure to do an overhaul to take out worn parts and put in new ones. Along with your new plates. They are very easy […]
The changes are being made to the 55cc, 75cc and 100cc variable displacement pumps/motors. The old part kit had a spacer, slipper, guide bearing for the slipper and slipper retainer. The spacer give it a certain amount of clearance for the slipper and slipper retainer. The guide bearing helps with the wear area for the
They put in an extra procedure to the spline part of the block. These three groove identification measures will be put on there to let you know you have a new model. Other measurements on the block want change. The pumps want change, but your service kits for the block will have this procedure on
If you need more info on the 90 Series, give us a call at 66-2871-8403 or 800-361-0068 [email protected]
This is a breakdown of this unit. If we can help with parts or repair of this unit, call us for a quote today. We also can repair or sell you a new one on any style or model of Denison units. And we buy surplus parts also. Just email us with what you have
DENISON HYDRAULICSM4D – M4SD – M4D1 – M4SD1 Vane Motor Read More »
Meaning of model code for example HBOL-F2-2/0-lP-6P HBOL = H – high pressure shaft seal used for pressure priming L = L – 5.4 GPM – 3000 PSI Max. M = M – 3.1 GPM – 5000 PSI Max H = H – 1.65 GPM – 10000 PSI Max F2 = seals for Ester Fluid
The tag on your hydraulic/hydrostatic pump or motor tells alot of information needed to help fix your unit,for parts or get a new unit all together. When that tag is torn off or worn off, makes it hard to identify your unit so you can get the correct unit or parts that fit your specific
Sundstrand Sauer Danfoss – Meanings of The Numbers On A Tag For A Pump/Motor Read More »
Identification There are 2 different sized of this adapter, make note of which one you will need. Tne newest model has a 9/16″ thread on the switch and the older one has a 3/4″ thread on the switch. So when you need to order another kit, the adapter will be in there. Also, the new
Eaton Neutral Lockout ID & Assembly In Open Position Read More »
The units that are affected by this are the 42cc, 55cc, 75cc and 100cc. On your older design the spring and the spring seat were set apart on the motor. The new way is designed has two parts that go into a one part assy. And it will make putting it together a whole lot
Sundstrand Series 90-75cc Motor – Loop Flushing Spring & Seat Read More »
Here are some charts, diagrams and breakdowns that will help you on this particular pump. This is a variable Volume Vane Pump. Call us at 662-871-8403 or email us at [email protected] for more help on this unit