Fraud Blocker

seal kit

Racine PSV 80/100 Series

They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to indicator variance. […]

Racine PSV 80/100 Series Read More »

Sundstrand Series 90/130 Motor Changes

If you need more info on the 90 Series, give us a call at 66-2871-8403 or 800-361-0068 [email protected]

Sundstrand Series 90/130 Motor Changes Read More »

Racine SV 20 Variable Volume Pump

The support rods are in each of the tandem mounting kits. There are different height differences for each type of job you want it to do, that they leave it up to the customer to bring their own rods and lock nuts. On the chart are support guide diameters and how you should mount it.

Racine SV 20 Variable Volume Pump Read More »

Dynapower Cube 9 Generation ll Part 1

Call us for any of your Dynapower Cube 9 or Goldcup needs at 662-871-8403 or 800-361-0068 [email protected] [email protected]

Dynapower Cube 9 Generation ll Part 1 Read More »

DENISON HYDRAULICSM4D – M4SD – M4D1 – M4SD1 Vane Motor

This is a breakdown of this unit. If we can help with parts or repair of this unit, call us for a quote today. We also can repair or sell you a new one on any style or model of Denison units. And we buy surplus parts also. Just email us with what you have

DENISON HYDRAULICSM4D – M4SD – M4D1 – M4SD1 Vane Motor Read More »

SV25 Hydraulic Variable Volume Vane Pump

Here are some charts, diagrams and breakdowns that will help you on this particular pump. This is a variable Volume Vane Pump. Call us at 662-871-8403 or email us at [email protected] for more help on this unit

SV25 Hydraulic Variable Volume Vane Pump Read More »

Rexroth Column Strength & Oversize Rod Selection

Rexroth Column Strength & Oversize Rod Selection Pull stroke procedures emphasize using standard rod diameter. And to determine that use these steps. First figure out the value of “L”. Then from the cylinder size and the highest operating pressure you can figure out the pull stroke from the thrust. You will be about to see

Rexroth Column Strength & Oversize Rod Selection Read More »

Rexroth Hydraulic Cylinders and Repair Kits

Rexroth Hydraulic Cylinders 1 1/2″ – 14″ Bore and Repair Kits In the diagrams and charts you will find the bore sizes and repair kits for this. On the bore chart if you see a (t) like symbol by it, it means the quantity may be more depending on mounting and bore size. All the

Rexroth Hydraulic Cylinders and Repair Kits Read More »