Fraud Blocker

shaft seal

Vickers PVB/PVB5/PVB10/PVB6/PVB15/PVB29 Control Data

Look on the model code for control data information each model. C and CM Pressure Compensators This means it will intuitively change how the pump will handle pressure at a predetermined time and amount of pressure at the time it is needed. The amount of pressure can go up or down (60 – 90 psi) […]

Vickers PVB/PVB5/PVB10/PVB6/PVB15/PVB29 Control Data Read More »

Racine PSV 80/100 Series

They have support guides in both tandem mounting kits. The differences in heights for each job, the customer is required to take care of the actual support rods and lock nuts. They need to be put onto the same mounting area as the pump and motor. Needs to be aligned to .003″ to indicator variance.

Racine PSV 80/100 Series Read More »

Dynapower Cube 9 Generation ll Part ll

If you need more info on this unit or any of the Dynapower Models, call us at 800-361-0068 [email protected]

Dynapower Cube 9 Generation ll Part ll Read More »

Racine PVF Variable Volume Vane Pump

PVF-PSTO-12* *-01 P = Higher Standard Compensator S= look for the diagram for screw volume control B,C,E = look on the diagrams below for parts list for springs R,L,D = see which letter matches up with the letter on your pump code. *goes with bodies 221458 and 221581 only chart on the right – adaptor

Racine PVF Variable Volume Vane Pump Read More »

Dynapower Cube 9 Generation ll Part 1

Call us for any of your Dynapower Cube 9 or Goldcup needs at 662-871-8403 or 800-361-0068 [email protected] [email protected]

Dynapower Cube 9 Generation ll Part 1 Read More »

PARKER/DENISON HYDRAULIC T6DCC – T6DCC Hydraulic Pump

General Information of this pump This tells what each item is on this pump. Will help in ordering parts . If you need further assistance, call us at 662-871-8403 [email protected]

PARKER/DENISON HYDRAULIC T6DCC – T6DCC Hydraulic Pump Read More »

Racine Model 80 Hydraulic Pump

Meaning of model code for example HBOL-F2-2/0-lP-6P HBOL = H – high pressure shaft seal used for pressure priming L = L – 5.4 GPM – 3000 PSI Max. M = M – 3.1 GPM – 5000 PSI Max H = H – 1.65 GPM – 10000 PSI Max F2 = seals for Ester Fluid

Racine Model 80 Hydraulic Pump Read More »

Parker Torquemotor – General Information

The series of motors that this is for are the TF, TG, TH and TL. They have a industrial strength thru and roller bearing for loads that the capacity is two sided loads. The roller vanes are made to cut down on friction and leakage, and give the best performance. The TF Series The way

Parker Torquemotor – General Information Read More »