Hydraulic Valves
If you need further information on these valves, call us at 662-871-8403 [email protected]
If you need further information on these valves, call us at 662-871-8403 [email protected]
If you need more info on this particular pump or any Make of Vickers Hydraulic Pumps or Motors, call us at 662-871-8403 [email protected]
Marked on both diagrams, it is marked for the larger link pictures that is needed for this unit. Helps in setting the adjustment for the controller. If you need your controller repaired or need a new controller, we can assist you with that. We provide HDC, EDC and MDC controllers. So give us a call
PVF-PSTO-12* *-01 P = Higher Standard Compensator S= look for the diagram for screw volume control B,C,E = look on the diagrams below for parts list for springs R,L,D = see which letter matches up with the letter on your pump code. *goes with bodies 221458 and 221581 only chart on the right – adaptor
On the new models the MDC, the trepan groove has been taken out from the two servo ports on the control. So now you will need washers put into the two servo ports. The washers are put in all the kits now. You will need to put the orings in the servo port outlets. Put
Sundstrand Series 20 Manual Displacement Control Read More »
Here are several characteristics of these types of pumps. It has five different displacements, .88, 1.25, 2.09, 2.62 and 3.78 cubic inches per rotation Straightforward Design and built to last. The size is small so it can be put in tight spaces and runs quietly. The displacement is adjustable to help with flow rate needs
HPV Series Hydraulic Piston Pump – Mounting Flange Read More »