Series 101 Hall Pump/Motor
If you need more information on this model, give us a call at 662-871-8403 [email protected]
If you need more information on this model, give us a call at 662-871-8403 [email protected]
Thick Plate is 101315 Code 61 SAE split flange, 5000 PSI, drilled and tapped for 3/8-16 UNC 28 thread bolt Code 62 SAE split flange, 6000 PSI, drilled and tapped for 7/16-14 UNC 28 thread bolt If you need more info on this unit, call us at 662-871-8403 [email protected]
If you need more info on this unit or any of the Dynapower Models, call us at 800-361-0068 [email protected]
Drive shaft and bearing need to be cleaned thoroughly and put a coating of oil on them to help with wear and tear on the parts. To put the drive shaft back together start with a retaining ring going over the internal end of the shaft and put in the groove that is closest to
These will affect models M25, M35, M46 and LV pumps and motors. It changes from a woodruff key shaft to a straight key on a tapered shaft. The shafts that have the woodruff shafts are no longer available. You can get it for service requirements, but if it is replacement it will go to a