Fraud Blocker

reservoir

Heat Exchangers Series K

To hookup fluid that is hot in the lines and the water that is cooled in the lines you will need an automatic water regulating valve. You will need to put in inlet end of the cooler. Then put the water outlet piping in such a way that the exchanger stays submerged with water and […]

Heat Exchangers Series K Read More »

Vickers PVB 20/29 Axial Piston Pump – Remote Control Of Compensator

Black triangle means: this for loading sensing pressure limiter PVB5/6………………191 PVB10-15…………..222 PVB20/29………….250 On port tapping: Port Type Port Tapping A PFB5 .56518UNF-2B 28.7 PVB5/6 .562518UNF-2B 19 PVB10/15 .750016UNF-2B 29.3 PVB20/29 .750016UNF-2B 38.9 If you need more information on this unit, call us at 662-871-8403 or 800-361-0068 [email protected] or [email protected]

Vickers PVB 20/29 Axial Piston Pump – Remote Control Of Compensator Read More »

Denison Hydraulics Series 8A Axial Piston Pump – Troubleshooting

Call us if you have more questions 662-871-8403 or 800-361-0068 [email protected]

Denison Hydraulics Series 8A Axial Piston Pump – Troubleshooting Read More »

Eaton Neutral Lockout

Mating connector and terminal part numbers Connector #1201 5792 Terminals #1208 9040 Cable Seal #1201 5323 When you are putting the servo control valve together some hydraulic fluid can come out, when trying to take out the neutral lockout switch and adapter assy. Make sure you cut off the hydraulic reservoir to the pump and

Eaton Neutral Lockout Read More »

How a Reservoir Works and Types

Tupelo Hydraulics would like to talk about Reservoirs and the different types and its importance: Industrial reservoirs come in a variety of styles among which are the L shaped,overhead and the conventional reservoir. Besides acting as a fluid container, a reservoir serves also to cool the fluid, to allow contamination to settle out and to

How a Reservoir Works and Types Read More »

Rexroth A6VM/AA6VM Hydraulic Pump – Startup

The motor needs to be filled up with fluid (fill the case chamber), start on low speed and don’t put a load pressure on it til you bleed it out. If not used in awhile, fluid can leak out thru the case in the lines. Fluid needs to be in the lines to start it

Rexroth A6VM/AA6VM Hydraulic Pump – Startup Read More »

John Deere Crawler 655B/755B – Charge Pump Removal & Installation

When putting on a charge pump you will need to know if it is right or left hand. On a left hand charge pump has the transmission control pump. You can take out the charge pump without taking out the transmission. Make sure you clean the transmission before you take out the charge pump. Take

John Deere Crawler 655B/755B – Charge Pump Removal & Installation Read More »